Complete
Details
Assignee
Boris VasilenkoBoris VasilenkoReporter
Martin HansenMartin HansenLabels
Impact
MediumTime remaining
0mComponents
Fix versions
Affects versions
Priority
Low
Details
Details
Assignee
Boris Vasilenko
Boris VasilenkoReporter
Martin Hansen
Martin HansenLabels
Impact
Medium
Time remaining
0m
Components
Fix versions
Affects versions
Priority
Katalon Platform
Katalon Platform
Katalon Platform
Created December 29, 2021 at 3:31 PM
Updated July 1, 2022 at 5:55 PM
Resolved January 14, 2022 at 10:22 AM
Hi!
I just upgraded to Truenas Scale from a working Core setup. The issue I have is that I want to Passthru an LSI 9380-8e (Connected to a JBOD full of ext3 devices with chia mining) to a virtual machine. I couldnt get the ext3 drives mounted as drives so I just passed them in to a VM instead.
But no PCIe device shows up to pass on in scale. IOMMU is enabled. I do believe the virtualization settings in BIOS are set correctly also since it was working before. But im checking it at the moment. Since there are a lot of drives connected to this system the bios setup is slow to get to. =)
root@freenas:/mnt# dmesg | grep -e DMAR -e IOMMU
[ 0.019417] ACPI: DMAR 0x000000005B784CE8 000148 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
[ 0.019469] ACPI: Reserving DMAR table memory at [mem 0x5b784ce8-0x5b784e2f]
[ 0.030549] DMAR: IOMMU enabled
[ 1.817783] DMAR: Host address width 46
Hardware Supermicro X11SPM-TF with Gold 6248 and 192GB RAM. LSI 9380-8e device at adress 17.00.0.